RAFAA Architecture and Design
Post By:Kitticoon Poopong
Image © Courtesy of RAFAA Architecture and Design |
Image © Courtesy of RAFAA Architecture and Design |
height of 2.5m in the upper deck, sleeping bunks, technical equipment and hatches
are built into the lower deck. they serve as 'extension rooms' of the upper deck: beds and couches are embedded into the floor and can be opened as the need arises.the external measurements are 5m x 15m. in the front area, there is a covered terrace;there, you can find a staircase leading to the roof. together, the kitchen and the living room form a generous open room. the bathroom consists of a core separating both bedrooms from the common room. the bedroom can be separated by sliding panels and used separately as a study. all in all, there are six beds (incl. 2 bunk beds).
Image © Courtesy of RAFAA Architecture and Design |
and lower margin of the picture. since the height and shape of the levels can be varied,
the perspective and view of the landscape keep changing. the floor, for example, bends
downwards at one point and disappears into the water. at another point, the roof curves
down to the floor. at some other spot, it opens in order to make space for the staircase.
all this generates a play on forms that, together with the swell, the wind and the water
reflection results in an intense nature experience.
Image © Courtesy of RAFAA Architecture and Design |
The horizontal, undulated shape of the waterfront is the inspiration for the design of the project. it also serves as means for orientation for the residents. the landscape can be understood as an extension of the living room. therefore, an unobstructed view of the landscape enhances the spatial quality of the design.
Image © Courtesy of RAFAA Architecture and Designc |
is necessary due to possible adjacent neighbours. however, there is a practically boundless
freedom when landing on unmarked sites. a flexible view and light protection are therefore
necessary, not only for climatic reasons. it allows for the screening of certain rooms from
others, if required.
The roof and the floor are built with conventional methods of boat construction as load-bearing structure. they have reinforcing ribs made of fibre-reinforced plastic (frp). the bracing is effected through the core. the roof lies on the floor on certain spots and protrudes 2.5m over the terrace area. the shape of the ceiling adjusts itself to the static requirements.
the roof’s forming during load effect has to be calculated for the accuracy of the geometry.
for serial production, the use of cnc-machines has to be considered. the specialisation of digital production methods, together with traditional craft technology can be the future direction for the lusatian dockyards.
floor plan--Image © Courtesy of RAFAA Architecture and Design |
sections--Image © Courtesy of RAFAA Architecture and Design |
elevations--Image © Courtesy of RAFAA Architecture and Design |
elevations--Image © Courtesy of RAFAA Architecture and Design |
section detail--Image © Courtesy of RAFAA Architecture and Design |
exploded axo--Image © Courtesy of RAFAA Architecture and Design |
The people
Architects: RAFAA Architecture and DesignLocation: Germany
Images: © Courtesy of RAFAA Architecture and Design